THREE BLOW HEADERS WITH ROTARY DIE HOLDER
GENERAL CHARACTERISTICS
The four dies are assembled at 90° on a rotary die-holder.
The blank is cut by an open knife, provided with a holding gripper assuring a perfect cut.
The blank is transferred into the die, and the rotating die-holder takes it successively in front of the three heading punches assembled on the ram.
The rotation of the die-holder is operated by a cams and rollers device; a mechanical wedge assures a perfect matching.
The three forming punches are individually adjustable in vertical, horizontal and longitudinal direction.
The fourth stop of the die-holder allows the ejection of the finished piece.
- You can perform the following operating modes: 1) Manual; 2) impulsion/jog; 3) Automatic
- The clutch-brake is connected and disconnected immediately by the operating mode you are using.
- During the “jog” mode a transparent protection allows to safely control the set up of the tools.
- Punches individually adjustable in horizontal, vertical and longitudinal direction.
- Punch ejectors individually adjustable. PKO with separate levers for each punch.
- Wire feeder by a double straightener and a double clutch.
- Lubrication of all the moving parts under pressure, with recovery of the lubrication oil
- Cooling system of the tools independent from the lubrication.
- A sound proof cabin with noise reduction under 85 db is included, provided with fan for the fume suction. One conveyor belt included. Decoiler for wire not included.
- Two sets of manuals for complete instructions, in English, together with assembly drawings of the machine and spare parts catalogue
- The machine doesn’t require any special pavement, fixing system or foundations.
- The machine is predisposed for assembling any kind of process monitor (not included)
ELECTRIC CONTROLS
- Main power motor with continuous speed variation included.
- Pneumatic clutch-brake.
- The structural electric elements have a protection level of IP55.
- All the operations and safety controls of the machine are operated by PLC Siemens equipment (manufactured with S.Q.C. according to EN29001-ISO 9001).
- The programmable controllers are SIMATIC 7 – SIEMENS
- The electric control board is separated from the former itself, operated by a Siemens touch-panel and push-button panel, provided with alarms control, speed variation control, warning board, production counter.